AutoSD, Inc.

The Ladder package consists of ladders with and without cages. Dimensions on the ladder detail are calculated based on your input, (not a bunch of blocks that have to edited every time). Hoops are drawn to scale from your input, (no blocks). The entire ladder is piece marked and shop billed so you have a completed detail when the program is finished.

Below is a list of features in the Ladder package.

Key Features

1. Draw ladders with or without cage.

2. Draw side step or step through ladders.

3. Draw hoops to scale using your input dimensions, not predefined blocks.

4. Ladders are dimensioned using your input.

5. Number of rungs and hoops, spacing of hoops are calculated for you.

6. There are three types of side step hoops, three types of step through hoops, and four types of intermediate hoops to choose from.

7. Ladders can be drawn with flat bar, angle or channel stringers.

8. Draw elevator pit ladders.

9. Draw caged ladder to underside of roof hatch.

10. Draw elevation view on Erection drawing.

11. Main member and all sub pieces automatically shop billed for you.

12. Detail in imperial or metric.